Built around the cars. Kept alive by the people.
Archived member · original account, not a current login
nah does not latter now. my car is 1986 and has a series 2 motor in it i was surprised because i looked at a series 2 diagram and then lloked at my motor and found all the oil feed pipe holes and oil …
so the oil sender is where you out the oil feed pipe to turbo what about the oil drain pipe connection in a series 1 what do you have to do there?
i have a series 1 is this hard convert it into turbo motor
i am not really worried at the moment about running the boost too high because i just wanna convert it first then after do some mods to the drivetrain and bottem end rebuild.i am going to run the stan…
well i wanna do it to my car. i have a vl turbo cam and a old turbo (which is from my brothers car), is it worth putting one in my car or buying a vl turbo. i wanna just convert it because i have spen…
i am considering changing my diff ratio to 4.11 and putting a different cam. MY brother has gave me his VL turbo camshaft and i am wondering if i put it in do i HAVE to change the chip in the ecu and…
Well i advanced my timing and the car was running good and had good bottem end power. I noticed that the cars response was not very good and alot of black soot is around the end of the exhaust . can s…
well i use to put a fuel called RF100 into my car when i use to race motocross back in the days and it ran sweet
i was wondering if i make the gap on Bosch Super 4's bigger by 1millimeter will this give my car better performance and take off. And also is 1 millimeter too big a increase?
man it was a old one about 1980's it was a 1.3 litre and smoked and ****
0 members and 0 guests active in the last 15 minutes
Visitors Today15
33,602 threads, 484,230 posts and 24,897 images saved from CalaisTurbo.
As at . Recovery is continuing.