car cancer(rust)
13 Jan 2006If the rust in the boot isn't too bad yet, get some grease and lube the affected areas up and that should take care of it for quite a while to come yet. I've got quite a bit of rust forming in the flo…
THE HOLDEN COMMODORE FORUM
HOLDCOM Community
Built around the cars. Kept alive by the people.
Sponsored by HOLDCOM AUTO PARTS ↗
+ Start a discussion
Forum Home / Member profile
Digamma
Archived member · original account, not a current login
11 posts3 discussions
Recent posts
About to replace the lifters
5 Mar 2005I bought a set of repco lifters a few weeks ago, and finally have the time to install them. My whole engine ticks and I've tried rebuilding the lifters once and they tick worse than ever after that. T…
calaisturbo.com.au - Engine rebuild or replacement
19 Oct 2004In the next 12 months (I hope), I want to redo the engine in my berlina. It's a standard rb30 n/a, 5 speed auto. I was thinking of going to a turbo, and putting a rear disc axle on too. What do I need…
Steering wheel, Lock to lock.
25 Sept 2004You may have bent something in your steering linkage, like the tie rod perhaps?
Leaking Exhaust
15 Sept 2004Quote: Originally Posted by Uter my car makes a weird sound as well when i put my foot down and its under 2500rpm, but once i get to 2500rpm it stops, my dad said it might be a flange gasket? now iv…
Leaking Exhaust
13 Sept 2004I get roughly 350-400ish out of a tank. The engine has 270000 on it, so I'm not complaining really. It also needs a good service and tune by someone who knows what they are doing. I can do bits, but A…
Leaking Exhaust
13 Sept 2004I sometimes drive like a leadfoot, mostly I try to eek as much out of a tank as I can. The leak was after the O2 sensor, at the exhaust manifold flange.
Leaking Exhaust
13 Sept 2004Would my fuel economy be affected if the exhaust was leaking? The exhaust was noisy, so I had a look and the cat was leaking, and coz I'm a cheapass, I used muffler putty as a kind of liquid gasket. …
HELP needed with rear control arm bushes
23 Aug 2004I replaced some bushes on my old datsun stanza years abck and what I did in the end was get a hole saw, and drill out the majority of the rubber in the bush. I then used a hacksaw to cut thru the rubb…
calaisturbo.com.au - Easier Install for Central Locking....
27 July 2004Where did u get that crinkled tubing from to run your wires through? I'd love to have that instead of just grommets and bare wires!
Who’s online
0 members and 1 guest active in the last 15 minutes
No signed-in members active right now. Guests are welcome to browse.
Visitors Today11
33,602 threads, 484,230 posts and 7,512 images saved from CT
98.1% of indexed threads saved