Motorvation 2005 [PICS]
16 Jan 2005[Image in original archive] Yes Lexus...and a very tight fit indeed...great conversion however. Not a VL but RB30ET Powered I managed to grab 3rd or 4th in the slalom event..pipped by a few Evo's an…
Built around the cars. Kept alive by the people.

Archived member · original account, not a current login
[Image in original archive] Yes Lexus...and a very tight fit indeed...great conversion however. Not a VL but RB30ET Powered I managed to grab 3rd or 4th in the slalom event..pipped by a few Evo's an…
Just goy my car back from Tim Slako. Expensive = Yes Nice Guy = Yes Thorough = Yes Tune = Very safe (No timing) Quote: I know of a few people who have had motors die, due to something they didn'…
Don't go putting bigger injectors in if your not after more performance. I run Bosch 036's, and then had to run aftermarket ECU to run them, Fitted and tuned your looking at around $2500, plus the pr…
I'm running ACL Forgies. $1200 trade. Come in a Pretty box with Larry Perkins face plastered all over it, and a warning about not for street use. They are visibly different to the ACL Forgies in a …
Quote: I traced the rear oil breather line going into the cooler pipes (from cooler to t/b) instead of into the air intake piping as before - which means this see's boost now - would this be the prob…
17.3 is about what they ran from the factory according to Magazines of the day. But your MPH is abnormally low for even a 17.3! As a guide my old R31 Skyline auto wagon...with 126rwHP ran a 16.223 @…
Quote: iz it possible to get a flywheel torque reading from a dyno run? i just neva hear of it. Yes it is, Dynodynamics dynos can estimate drivetrain loss, and so estimate a power / Torque figure at…
Quote: the other version (overseas) has a wider body etc, therefore unable to bolt on pieces etc. Whhhhhat..? Who told you that..?, the Opel, Vauxhaul, Holden Calibra are one and the same bar a few…
I've been into cars since day Dot! Had hundreds of Dinky / Matchbox cars [Image in original archive] Also went thru a Plastic Model making phase, pumped out heaps of Cars and planes. Now I have a f…
Its a VK without doubt [Image in original archive] You can put Metal bumpers etc on a VK, but you can't put the rear quarter window into a VH..! [Image in original archive] Looks cool
0 members and 0 guests active in the last 15 minutes
Visitors Today14
33,602 threads, 484,230 posts and 10,935 images saved from CT