Back to shop ↗
THE HOLDEN COMMODORE FORUM

HOLDCOM Community

Built around the cars. Kept alive by the people.

+ Start a discussion
Holden Commodores gathered at Holdcom
Forum Home / Member profile

-Bluft-

Archived member · original account, not a current login

7 posts0 discussions

Recent posts

High Beam switch doing funny things.

26 Aug 2002

Same as the last two boys. Check that fuse! Had it happen to me on a sweeping corner late at night. Scared the living crap out of me when everything went black! It was only a fuse in the end. Happy h…

Car stalling when snap 2nd what the F#*K?

23 Aug 2002

If it has a BOV venting to atmo, it could be over fueling, causing it to stall. If this is the case, get a recirculating BOV. Should sort out the problem as ong as you can live without the Psshhht sou…

dash lights

27 July 2002

it's the low fuel warning light, i think your sensor may be shagged

Gauge and diff problems

24 June 2002

The only differance between the vl V8 diff and the vl turbo diff is the ratio. the v8 is a 3.08 and the turbo is a 3.45. Both have 28 spline axles. The NA diff has 3.45 ratio but only 25 spline axles.…

Boot lid not fitting flush

24 June 2002

dr00, with the bonnet, there should be two rubber stops that can be adjusted, for the side that sits to low, unscrew the rubber stop a little until it sits flush on that side when you close it. For th…

Problem Engine

19 June 2002

With out sounding like a broken record, my bet is the Crank Angle Sensor, as RB30-POWER suggested. I recently had the exact same symptoms as you. Changed the CAS and all is fine again. Cheers

Combo for 200+rwkw

19 June 2002

Are we talking 200rwkw here? Because thats roughly 300kw at the motor, and if thats the case. Depending on the size turbo, (High flowed to3 will need more than 15psi as a max to get that sort of power…

Who’s online

1 member and 1 guest active in the last 15 minutes

Visitors Today7

33,602 threads, 484,230 posts and 6,897 images saved from CT

98.1% of indexed threads saved